Microstrip Bandpass RF Filter with λ/4 Stubs 🎛️

Filter Design playlist.
https://www.youtube.com/watch?v=OmZyBYe2w6E&list=PLFxhgwM1F4yxBdUMrkTLhTPIeG1I99x3d&index=1

For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.

How to Design a Bandpass Filter with Shunt Short-circuited Stubs on Microstrip Lines for Beginner.
How to Design Bandpass Microstrip Filter with λ/4 Shunt Short-Circuited Stubs & Connecting Lines.
How to Design Microstrip Bandpass Filter, BPF with Quarter-Wave λ/4 Shorted Stubs & Connecting Lines

A bandpass filter can comprise of shunt short-circuited stubs that are λg/4 long with connecting lines that are also λg/4 long, where g is the guided wavelength in the medium of propagation at the midband frequency f0.

Design a BandPass Filter using microstrip lines with specifications as following: fifth order (n=5), a fractional bandwidth FBW = 0.5 at a mid band frequency of f0 = 2 GHz and a 0.1dB passband ripple characteristic.