Rebuild Clack Water Softener in 60 Seconds! ⚙️

Clack Water Softener not working? Rebuild using this rebuild kit https://waterestore.com/products/clack-ws1-softener-rebuild-kit
1) Bypass and click and hold Regen button to start regeneration to release the pressure inside the valve.
2) Disconnect drain line and catch excess water from drain line if any
3) Unplug and remove main frame
4) Unscrew the drive end cap assembly and pull out the pistons
5) Pull out the Spacer Stack
6) Clean out the valve with a clean rag
7) Replace the spacer stack, pistons and drive end cap assembly
8) Careful not to over tighten
9) Put valve together
10) Plug into circuit board to resync.
11) Open bypass valves and check for leaks.
12) Faceplate back on and press Regen!
Let me know if you have any questions.
Click the link in my Bio to check out my blog post for more info!
For more great videos on Water Softeners, subscribe!
Water Softener playlist here https://youtube.com/playlist?list=PLmnBltD77jBXSLyXWZw3cSXj2VyAY9PMu
LOVE GARY THE WATER GUY AND WANT TO LEARN MORE ABOUT WATER FILTRATION FOR YOUR FAMILY? HERE ARE SOME NEXT STEPS!
1) SIGN UP TO KEEP IN TOUCH WITH GARY! https://mailchi.mp/waterestore.com/subscription

2) LET’S CONNECT!
https://www.facebook.com/WaterEstoreCa/
https://twitter.com/WaterEstore
https://www.linkedin.com/company/the-water-filter-estore/
https://www.instagram.com/Water_Estore/
https://www.instagram.com/WaterStoreMidland/

3) CONTACT!
info@WaterEstore.com or info@WaterStoreMidland.com

4) SHOP!
Midland https://www.WaterStoreMidland.com
Canada https://www.WaterEstore.ca
USA https://WaterEstore.com/

Please comment or ask questions below.
#waterestore#garythewaterguy#watersoftener