Day 9 Fusion 360 Day 9: Beginner's 2023 Guide 🛠️

New to Fusion 360? This is a brand new 2023 version of Day #9 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: https://bit.ly/30daysUpdated

**Support our free tutorials**
PayPal - https://paypal.com/paypalme/productdesignonline/30
Patreon - https://patreon.com/productdesignonline
Say Thanks w/Coffee - https://buymeacoffee.com/pdo

TUTORIAL RESOURCES ➞ https://productdesignonline.com/d9
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 9 3D Model an LED Light Bulb in Autodesk Fusion 360
00:33 - Create a Cylinder Primitive in Autodesk Fusion 360
01:40 - Intersect lines in Autodesk Fusion 360
02:53 - Sphere Primitive in Autodesk Fusion 360
03:15 - Inside Fillets add Material in Fusion 360
03:47 - Add Appearances to specific parts in Fusion 360
04:27 - Edit Appearance Color in Fusion 360
05:16 - Fusion 360 Thread Command Explained
06:03 - Apply Chamfer in Autodesk Fusion 360
07:17 - Day 10 of Learn Fusion 360 in 30 Days

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk