Staad.Pro V8i Advanced Video Training - Chapter 1: Introduction and Applications

Staad.Pro V8i(advanced)- Video Training <br /> <br /> <br /> <br />Chapter-1 -Introduction <br /> <br />About STAAD.Pro and Applications <br />Application in Industry vs University comparison <br />Traditional Structural Analysis vs. MODERN approach <br />By HAND Vs. By computer <br />Finite Element Method-Introduction <br />FEM Solutions <br />STAAD Module Orientation <br />Analysis capability and International Code support <br />3rd part integration support <br />GUI Quick overview <br />Model Generation Techniques <br />Command File editor info <br />Built-in info order <br />Finite Element modeling <br />Load types and Generation <br />Model Verifications <br />Adv. Analysis capability <br />Result verification and post processing <br />Design code-RCC and Steel <br />Report customization <br /> <br /> <br />Chapter-2 -Solving Method <br /> <br />Solving Approach <br />How to start STAAD.Pro V8i <br />Navigating STAAD.Pro V8i GUI <br />Configuration & Settings <br />Unit and Code configuration <br />Back Up Manager <br />Opening and Saving Projects <br />Archiving Projects <br />Overview of Structure <br />Status Bar detailsHierarchy Managing <br />Understand the different component of GUI <br />VIEW Controls <br />Exercises & Projects. <br /> <br /> <br />Chapter-3 -Geometry Operations <br /> <br />Renumbering <br />Importing CAD Files <br />Details About Grid systems in STAAD. <br />Types of Structure and Methods <br />Types of Element <br />Mode of Structure <br />Creating Geometry for Structure <br />How to create Beam /Column & Curved Beams <br />Structure Wizard <br />Structure Wizard Model and STAAD Transfer <br />Modifying Geometry for Structure Copy /Copy-Link/Rotate/Mirror etc) <br />Add Mid points <br />Add Perpendicular intersection beam <br />Cut Section <br />Stretch /Split BEAMS <br />Hot spots <br />Fill Plates <br />Different Viewing Controls for Structure Geometry <br />Exercises & Projects. <br /> <br /> <br />Chapter-4-Boundary Conditions & Properties <br /> <br />Properties of beam/column <br />Display properties <br />Rendering <br />Steel profiles <br />Material + CROSS SECTION <br />Beam and column end offset + adv. options <br />Beta control <br />Use cursor to assign and selection <br />View assign <br />Types of support <br />Material Assignment <br />Material creation <br />Exercises & Projects. <br /> <br /> <br />Chapter-5 -Load Types <br /> <br />Load case <br />Defining Load case <br />Dead Load defining <br />Imposed Load defining (LIVE) <br />Point Load <br />UDL Load <br />Floor Load <br />Area Load <br />Wind Load –IS Code based <br />Seismic Load-IS Code based <br />Load combinations <br />Auto LOAD Combinations <br />Envelopes <br />Projects <br />Projects on Buckling <br />Exercises & Projects. <br /> <br /> <br />Chapter-6-Post-Processing <br /> <br />Analysis Outline <br />Analysis/Print <br />Beam2D <br />Post Processing <br />Local Coordinate System <br />Internal Hinge <br />Truss2D <br />User Customized <br />Inclined Support & Support Settlement <br />P-Delta Analysis <br />Bracing with Truss or Tension Members <br />Building with Flat Slab & Shear <br />Transfer Force for Connection Design <br />Exercises & Projects. <br /> <br /> <br />Chapter-7 -RCC Design & Analysis <br /> <br />RCC Design and Analysis <br />Loads and Repeat Load case for RCC <br />IS RCC Codes and STAAD.Pro <br />Exercises & Projects. <br /> <br /> <br />Chapter-8-Slab Design & Analysis <br /> <br />Slab Design and Analysis <br />IS CODE Check <br />Approach <br />Exercises & Projects. <br /> <br /> <br />Chapter-9 -Modal Analysis <br /> <br />What is Modal Frequency or fundamental Frequency <br />Necessary for conducting Modal Analysis <br />Parameters need to check after Analysis <br />Exercises & Projects.