Mastering Multi-Material 3D Printing: Design Tips & Slicing Techniques 🚀

Check out my 2nd channel, TT Racing: https://www.youtube.com/@TTRacingYT Multi material 3D printing is becoming widely available and will in the future become mainstream. In this video, I share my best tips and tricks for getting the most of such a printer. From slicer model placement, to achieving perfect supported geometry and functional multi material mechanisms, there should be something here for everyone. 0:00 Introduction 0:49 Snapmaker U1 and SV08 updates Snapmaker U1 pre-order (affiliate): https://snapmaker.sjv.io/nXm4Wo SV08 playlist: https://www.youtube.com/playlist?list=PLGqRUdq5ULsNIN_40Bv1iTbElj6O7BRrU 1:50 Slicer placement and material tuning Articulated Armadillo by McGybeer: https://www.printables.com/model/1260522-articulated-armadillo DSE calibration model: https://makertech-3d.dozuki.com/Guide/DSE+Only+-+Stage+12:+X-Y+Calibration+and+First+Print/44 4:37 Multi material perfect supports Support material guide: https://youtu.be/K_ZGZe-pbTI Support test by Faulty Data: https://www.printables.com/model/198420-support-test 8:41 Designing custom support blocks in CAD Noctua fan model by M. Z.: https://grabcad.com/library/noctua-nf-a12x25-1 10:30 Designing interlocking shapes Noctua Style Desk Fan (120mm) by analogicparadox: https://www.printables.com/model/309167-noctua-style-desk-fan-120mm My bedside table clamp remix: https://www.printables.com/model/678796-120mm-desk-fan-clamp-stand-remix 12:25 Beam interlocking 13:36 Combining rigid with less rigid filaments 14:45 Super tight clearance print in place models Print in place design video: https://youtu.be/8TiFKUlsR_Y 15:59 Conclusion Buy quality and affordable filament from www.x3d.com.au . Viewers get 5% off all X3D filaments and accessories with code T-Tech5 Take a look around and if you like what you see, please subscribe. Support me on Patreon: http://www.patreon.com/teachingtech